add jboss user creation scripts

4.docker/Dockerfile

@@ -1,5 +1,19 @@
 FROM jboss/wildfly:14.0.1.Final
 
+# User root user to install software
+USER root
+RUN yum -y install expect
+RUN yum -y install postgresql  
+
+# Switch back to jboss user
+USER jboss
+
+ADD createApplicationUser.sh /opt/jboss/wildfly/bin/
+ADD createManagementUser.sh /opt/jboss/wildfly/bin/
+
+RUN cd /opt/jboss/wildfly/bin && ./createApplicationUser.sh 
+RUN cd /opt/jboss/wildfly/bin && ./createManagementUser.sh
+
 ADD MyHealth.ear /opt/jboss/wildfly/standalone/deployments/
 RUN mkdir /opt/jboss/wildfly/modules/system/layers/base/org/postgresql/
 RUN mkdir /opt/jboss/wildfly/modules/system/layers/base/org/postgresql/main
@@ -7,5 +21,4 @@ ADD postgresql-9.4.1209.jar /opt/jboss/wildfly/modules/system/layers/base/org/po
 ADD module.xml /opt/jboss/wildfly/modules/system/layers/base/org/postgresql/main
 ADD standalone.xml /opt/jboss/wildfly/standalone/configuration/standalone.xml
 
-RUN /opt/jboss/wildfly/bin/add-user.sh USER PASSWORD#70365 --silent
 CMD ["/opt/jboss/wildfly/bin/standalone.sh", "-b", "0.0.0.0", "-bmanagement", "0.0.0.0"]

4.docker/createApplicationUser.sh

@@ -0,0 +1,92 @@
+#!/usr/bin/expect -f
+#
+# This Expect script was generated by autoexpect on Wed Dec 18 17:32:33 2019
+# Expect and autoexpect were both written by Don Libes, NIST.
+#
+# Note that autoexpect does not guarantee a working script.  It
+# necessarily has to guess about certain things.  Two reasons a script
+# might fail are:
+#
+# 1) timing - A surprising number of programs (rn, ksh, zsh, telnet,
+# etc.) and devices discard or ignore keystrokes that arrive "too
+# quickly" after prompts.  If you find your new script hanging up at
+# one spot, try adding a short sleep just before the previous send.
+# Setting "force_conservative" to 1 (see below) makes Expect do this
+# automatically - pausing briefly before sending each character.  This
+# pacifies every program I know of.  The -c flag makes the script do
+# this in the first place.  The -C flag allows you to define a
+# character to toggle this mode off and on.
+
+set force_conservative 0  ;# set to 1 to force conservative mode even if
+			  ;# script wasn't run conservatively originally
+if {$force_conservative} {
+	set send_slow {1 .1}
+	proc send {ignore arg} {
+		sleep .1
+		exp_send -s -- $arg
+	}
+}
+
+#
+# 2) differing output - Some programs produce different output each time
+# they run.  The "date" command is an obvious example.  Another is
+# ftp, if it produces throughput statistics at the end of a file
+# transfer.  If this causes a problem, delete these patterns or replace
+# them with wildcards.  An alternative is to use the -p flag (for
+# "prompt") which makes Expect only look for the last line of output
+# (i.e., the prompt).  The -P flag allows you to define a character to
+# toggle this mode off and on.
+#
+# Read the man page for more info.
+#
+# -Don
+
+
+set timeout -1
+spawn ./add-user.sh
+match_max 100000
+expect -exact "\r
+What type of user do you wish to add? \r
+ a) Management User (mgmt-users.properties) \r
+ b) Application User (application-users.properties)\r
+(a): "
+send -- "b\r"
+expect -exact "b\r
+\r
+Enter the details of the new user to add.\r
+Using realm 'ApplicationRealm' as discovered from the existing property files.\r
+Username : "
+send -- "USER\r"
+expect -exact "USER\r
+Password recommendations are listed below. To modify these restrictions edit the add-user.properties configuration file.\r
+ - The password should be different from the username\r
+ - The password should not be one of the following restricted values {root, admin, administrator}\r
+ - The password should contain at least 8 characters, 1 alphabetic character(s), 1 digit(s), 1 non-alphanumeric symbol(s)\r
+Password : "
+send -- "PASSWORD\r"
+expect -exact "\r
+WFLYDM0101: Password should have at least 1 digit.\r
+Are you sure you want to use the password entered yes/no? "
+send -- "Y\r"
+expect -exact "Y\r
+Re-enter Password : "
+send -- "PASSWORD\r"
+expect -exact "\r
+What groups do you want this user to belong to? (Please enter a comma separated list, or leave blank for none)\[  \]: "
+send -- " User,Trainer,Administrator"
+expect -exact " User,Trainer,Administrator"
+send -- "\r"
+expect -exact "\r
+About to add user 'USER' for realm 'ApplicationRealm'\r
+Is this correct yes/no? "
+send -- "Y\r"
+expect -exact "Y\r
+Added user 'USER' to file '/opt/jboss/wildfly/standalone/configuration/application-users.properties'\r
+Added user 'USER' to file '/opt/jboss/wildfly/domain/configuration/application-users.properties'\r
+Added user 'USER' with groups  User,Trainer,Administrator to file '/opt/jboss/wildfly/standalone/configuration/application-roles.properties'\r
+Added user 'USER' with groups  User,Trainer,Administrator to file '/opt/jboss/wildfly/domain/configuration/application-roles.properties'\r
+Is this new user going to be used for one AS process to connect to another AS process? \r
+e.g. for a slave host controller connecting to the master or for a Remoting connection for server to server EJB calls.\r
+yes/no? "
+send -- "Y\r"
+expect eof

4.docker/createManagementUser.sh

@@ -0,0 +1,92 @@
+#!/usr/bin/expect -f
+#
+# This Expect script was generated by autoexpect on Wed Dec 18 17:37:57 2019
+# Expect and autoexpect were both written by Don Libes, NIST.
+#
+# Note that autoexpect does not guarantee a working script.  It
+# necessarily has to guess about certain things.  Two reasons a script
+# might fail are:
+#
+# 1) timing - A surprising number of programs (rn, ksh, zsh, telnet,
+# etc.) and devices discard or ignore keystrokes that arrive "too
+# quickly" after prompts.  If you find your new script hanging up at
+# one spot, try adding a short sleep just before the previous send.
+# Setting "force_conservative" to 1 (see below) makes Expect do this
+# automatically - pausing briefly before sending each character.  This
+# pacifies every program I know of.  The -c flag makes the script do
+# this in the first place.  The -C flag allows you to define a
+# character to toggle this mode off and on.
+
+set force_conservative 0  ;# set to 1 to force conservative mode even if
+			  ;# script wasn't run conservatively originally
+if {$force_conservative} {
+	set send_slow {1 .1}
+	proc send {ignore arg} {
+		sleep .1
+		exp_send -s -- $arg
+	}
+}
+
+#
+# 2) differing output - Some programs produce different output each time
+# they run.  The "date" command is an obvious example.  Another is
+# ftp, if it produces throughput statistics at the end of a file
+# transfer.  If this causes a problem, delete these patterns or replace
+# them with wildcards.  An alternative is to use the -p flag (for
+# "prompt") which makes Expect only look for the last line of output
+# (i.e., the prompt).  The -P flag allows you to define a character to
+# toggle this mode off and on.
+#
+# Read the man page for more info.
+#
+# -Don
+
+
+set timeout -1
+spawn ./add-user.sh
+match_max 100000
+expect -exact "\r
+What type of user do you wish to add? \r
+ a) Management User (mgmt-users.properties) \r
+ b) Application User (application-users.properties)\r
+(a): "
+send -- "A\r"
+expect -exact "A\r
+\r
+Enter the details of the new user to add.\r
+Using realm 'ManagementRealm' as discovered from the existing property files.\r
+Username : "
+send -- "USER\r"
+expect -exact "USER\r
+Password recommendations are listed below. To modify these restrictions edit the add-user.properties configuration file.\r
+ - The password should be different from the username\r
+ - The password should not be one of the following restricted values {root, admin, administrator}\r
+ - The password should contain at least 8 characters, 1 alphabetic character(s), 1 digit(s), 1 non-alphanumeric symbol(s)\r
+Password : "
+send -- "PASSWORD\r"
+expect -exact "\r
+WFLYDM0101: Password should have at least 1 digit.\r
+Are you sure you want to use the password entered yes/no? "
+send -- "Y\r"
+expect -exact "Y\r
+Re-enter Password : "
+send -- "PASSWORD\r"
+expect -exact "\r
+What groups do you want this user to belong to? (Please enter a comma separated list, or leave blank for none)\[  \]: "
+send -- " User,Trainer,Administrator"
+expect -exact " User,Trainer,Administrator"
+send -- "\r"
+expect -exact "\r
+About to add user 'USER' for realm 'ManagementRealm'\r
+Is this correct yes/no? "
+send -- "Y\r"
+expect -exact "Y\r
+Added user 'USER' to file '/opt/jboss/wildfly/standalone/configuration/mgmt-users.properties'\r
+Added user 'USER' to file '/opt/jboss/wildfly/domain/configuration/mgmt-users.properties'\r
+Added user 'USER' with groups  User,Trainer,Administrator to file '/opt/jboss/wildfly/standalone/configuration/mgmt-groups.properties'\r
+Added user 'USER' with groups  User,Trainer,Administrator to file '/opt/jboss/wildfly/domain/configuration/mgmt-groups.properties'\r
+Is this new user going to be used for one AS process to connect to another AS process? \r
+e.g. for a slave host controller connecting to the master or for a Remoting connection for server to server EJB calls.\r
+yes/no? "
+send -- "Y\r"
+expect eof